Modules Collection
Voltmeter & Testers
Amplifier & Speaker
Project Package
Arduino & Raspberry PI
Motor & Pump
Soldering Tools
Clip Connector Switch
Tools for Diy
Mini Display
Gadget Zone
Battery & Charger
Robotics & Sensors
16%
OFF
HW-586 ZB2L3 1.2v 12v 18650 Li-ion Lithium Battery Capacity Tester Resistance Lead-acid Battery Capacity Meter Discharge Tester
৳320
৳270
SKU : MK0059
Specification
- Power supply voltage: DC4.5-6V (micro USB connector)
- Operating Current: less than 70mA
- Discharge voltage: 1.00V-15.00V 0.01V resolution
- Termination voltage range: 0.5-11.0V
- Supported by current: 3.000A 0.001A resolution
- Maximum voltage measurement error: 1% + 0.02V
- Maximum current measurement error: 1.5% + - 0.008A
- Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X.XXX, as shown above to achieve 10Ah XX.XX, and so on.
- Board size: 50mmX37mm
- Finished Size: 50mmX37mmX17mm (length X width X height maximum position size, contains copper foot height)
Description
- 100% brand new and high quality
- Material: Electrical components
- Color: See pictures
- HW-586 battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650
- Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results
- Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge
- Maximum capacity statistics support 9999Ah (9999000mAh)
- Automatically identify and develop appropriate battery termination voltage can also be manually adjusted
Instructions:
1. The first test should be fully charged battery.
2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage.
3. Direct start test need only one press of the "OK" button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing "+" or "-" buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the "OK "start testing.
4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press "OK" to terminate flashing allows stable data display, press again "OK" button to return to the power-on state can just replace the battery test the next section ......
Error codes and their meanings:
Err1: battery voltage is above 15V
Err2: battery voltage is lower than the termination voltage
Err3: Battery can not afford to load or discharge current line too much resistance
Err4: overcurrent (current exceeds 3.1A)
Note: Use the resistance of the discharge process, resistive load will seriously heat, please pay attention to safety!
This circuit voltage in order to improve the measurement accuracy, specially designed DC bias, when the terminal displays nothing then a small voltage does not affect the actual measurement, if you are shorting the input terminals (absolute 0V) will show 0
No retail package
Quantity: 1Pc
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!
Package Included:
1Pc x battery capacity tester
2Pc x Load resistors
Reviews (0)
Get specific details about this product from customers who own it.
This product has no reviews yet. Be the first one to write a review.
Video
22%
Off
24%
Off
27%
Off
28%
Off
16%
Off
28%
Off
32%
Off
29%
Off
26%
Off
21%
Off
16%
Off
31%
Off
38%
Off
18%
Off
24%
Off
27%
Off
34%
Off
30%
Off
21%
Off
13%
Off
27%
Off
22%
Off
8%
Off
Product Tag
HW-586 battery tester, ZB2L3 capacity meter, 1.2V 12V battery tester, 18650 Li-ion battery capacity, lithium battery tester, lead-acid battery capacity, discharge tester, battery resistance tester, battery capacity analysis, rechargeable battery tester, portable battery testing, electronic testing equipment, battery performance meter, battery health checker, energy storage testing tools
